Position size calculator: how large should one trade be

Decide how much of your account you are willing to lose, then work back from the entry and stop loss to the number of coins to buy. Doing it the other way round — picking a size first and looking for a stop afterwards — usually puts the stop where it does not belong.

Enter the trade

Direction
—
Max loss
100
Quantity
0.05
Notional value
3,000
Required margin
3,000
Risk-reward
3.00 : 1

Excludes fees and funding, and ignores slippage and exchange minimum order sizes. Futures orders must be rounded to the contract size.

The logic: risk first, size second

Position size is not a feeling. It follows from three knowns: account size, the share you accept losing, and the distance to your stop.

Risk amount = account size × risk percentage
Quantity = risk amount ÷ |entry − stop|
Notional value = quantity × entry price
Required margin = notional value ÷ leverage

Direction is inferred from the stop: a stop below entry is treated as a long, a stop above entry as a short. That forces you to define the price at which your thesis is wrong instead of placing a stop wherever it feels comfortable.

Example: 10,000 account, 1% risk

Entry 60,000, stop 58,000, a distance of 2,000. A 100 USDT risk budget therefore allows 100 ÷ 2,000 = 0.05 BTC, a notional of 3,000 USDT. Leverage only changes margin: 1x ties up 3,000, while 20x ties up 150.

Risk per tradeMax lossQuantityNotionalMargin at 1xMargin at 20x
0.5%500.025 BTC1,5001,50075
1%1000.05 BTC3,0003,000150
2%2000.1 BTC6,0006,000300
3%3000.15 BTC9,0009,000450

Based on a 10,000 USDT account, entry 60,000 and stop 58,000.

How to choose the risk percentage

Risk per tradeLeft after 10 straight lossesAppropriate when
0.5%about 95.1%New to trading, strategy untested, several open positions
1%about 90.4%A fixed rule set and ordinary single trades
2%about 81.7%Backtested strategy, high-conviction setups
5%about 59.9%Aggressive; one losing streak takes a long time to repair
10%about 34.9%Not advised — recovering needs a far larger gain than the loss

The most common mistake: confusing leverage with size

Higher leverage ties up less margin, which creates the illusion that you can open more trades. What actually determines profit and loss is notional value, not margin. A 3,000 USDT position at 20x loses the same amount on a 5% adverse move as a 3,000 USDT position at 1x — it just loses it out of a smaller margin balance.

The dangerous version is working backwards: calculating the largest position your margin allows and filling it. That disconnects position size from stop distance, and an ordinary fluctuation can reach liquidation.

FAQ

What is the position size formula?

Risk amount = account size × risk percentage; quantity = risk amount ÷ |entry − stop|; notional value = quantity × entry; required margin = notional value ÷ leverage. The closer the stop, the larger the position the same risk budget supports.

What risk per trade should I use?

0.5%–2% is common. At 2% you keep about 82% of the account after ten consecutive losses; at 5% about 60%. Bigger numbers are harder to recover from because losses compound on the remaining balance.

Should higher leverage mean a bigger position?

No. Leverage determines margin, not size. A higher leverage only shrinks the room between your entry and liquidation for the same position, making an ordinary adverse move more dangerous.

Where should the stop go?

Where your thesis would be wrong — not where your maximum loss happens to be comfortable. Set the stop from market structure, then size the position. If you size first, the stop usually ends up somewhere arbitrary.

Does this work for spot?

Yes. Set leverage to 1 and the required margin equals the cash you spend. Spot has no liquidation, but an oversized position still produces drawdowns that are hard to sit through.

Why does the quantity differ from what the exchange shows?

Minimum order sizes, contract multipliers (1 contract may be 0.001 BTC), rounding down to the step size, and slippage on the fill. Use the notional value as your reference and round the quantity to the exchange rules.